Klondike-Detectors F.A.Q.

DETECTORS can be used to find deposits of useful resources in Klondike lands.

👉HOW DETECTORS WORK:

1) Create a Detector in the Storage building.

2) Set the Detector from Storage in the location.

3) Finish building the detector.

4) Wait 15 minutes for the Detector to finish scanning.

5) Look closely at the ARROW on the detector and at the light indicator. 

The ARROW points towards the useful resources deposit and the LIGHT INDICATOR shows how close you are: green means very close, red means far.

6) To clarify the location craft another detector and repeat the previous steps. 

7) Build a Detector on top of the deposit (after you clarify its location). If your guess is correct, your Detector will turn into a Geological Station.

8) Start to mine and get useful resources.

💡 IMPORTANT: Follow the arrows; the deposit will be right at the meeting point of the arrows on your Detectors.

You CAN’T build another Detector while the current one is working! Detectors can be used once only!

Detectors take 15 minutes after activation to finish scanning.

Draw imaginary lines following the direction the detector points. Once you have determined where the two lines intersect place a third Detector over the spot, click it and activate it.

GEOLOGICAL STATION

Once you set the Geological Station it takes some time to finish mining the deposit. 

You can now chop the deposit for resources